7in1 Half Face Gas Mask Facepiece Spray Painting Respirator Reusable Safety Suit For 6200 With Filter Chemical And Other Work Protection

Features:

1.7 In 1：1 set includes a 6200 Half Face Gas Mask, 2pcs  6001 filter cartridges, 2pcs 5N11 filter cotton and 2pcs 501 filter covers, to meet your needs.

2.Protection objects: organic gases and steam, such as benzene and homologues, gasoline, acetone, sulfur dioxide, ether, etc.

3.High quality rubber material：suitable for users to wear for a long time, easy to clean and maintain, comfortable and durable.

4.Cold flow vent valve：Large opening of the exhalation valve, easier breathing.

5.Double-cartridges mask with low breathing resistance, compact appearance, low profile design, easier to use with other labor protection products.

6.The filter cartridge and filter cotton are easy to install and disassemble, and the soft gasket ring ensures close fitness.

Specifications:

Material: Rubber,Plastic, Fiber

Color: Grey

Instructions for use:

1.Hold the end of the strap with both hands, pull the strap all the way, so that the mask can completely cover the nose and mouth area, and connect the fastener behind the neck to seal the mask and the face.

2.Pull the end of the strap again to further tighten it.

3. Before use, check the mask to determine whether it is properly sealed, cover the air inlet side of the filter box with your palm, gently inhale, and hold for 5-10 seconds. If the mask is a little recessed, it proves that the effect is good. If tested The air leaks in the middle, adjust the tightness of the mask and re-adjust the elastic belt, eliminate the leakage, and re-do the airtight inspection until it is qualified.

4.During use, when the user smells the smell or the inhalation resistance increases, the service life of the cartridge has expired, please replace the cartridge or cotton filter immediately.

Special NOTE for users

1. Please do not use this mask when the oxygen concentration is lower than 18%.

2. Please do not use in the following situations:

(1) Unknown hazardous substances

(2) The concentration of harmful substances reaches a concentration that immediately endangers life and health

(3) When you smell or taste harmful substances.

3. Don't modify this mask

4. Before use, a qualified person should conduct pre-use training.

5. When not in use, store the mask in a place away from contaminants and keep it sealed.

Package Included:

1 x Gas Mask

2 x 6001 Filter Cartridge

2 x 5N11 Filter Cotton

2 x 501 Filter Cover